Chemical Earthing Electrodes

R s Valve & Products Advance Earthing Electrodes are engineered to endure the most enviously corrosive environments. These electrodes are robust enough to withstand the fault currents of high magnitude. Fabricated from excellent qualtiy galvanized iron pipes and hot dip galvanized primary conductor. R s Valve & Products electrodes are virtually indestructible. The super conductive crystalline compound filled inside the pipe completely encloses the primary conductor increasing it’s overall conducting surface area and protecting it from corrosion. Crafted to perfection R s Valve & Productsadvanced earthing electrodes are built to last really long and protect your expensive equipment from dangerous fault currents. Think twice before you opt for conventional earthing techniques. After all your expensive equipments deserve nothing less than the best !!!

R s Valve & Products Advance Earthing Electrodes are engineered to endure the most enviously corrosive environments. These electrodes are robust enough to withstand the fault currents of high magnitude. Fabricated from excellent quality galvanized iron pipes and hot dip galvanized primary conductor. R s Valve & Products electrodes are virtually indestructible. The super conductive crystalline compound filled inside the pipe completely encloses the primary conductor increasing it’s overall conducting surface area and protecting it from corrosion. Crafted to perfection R s Valve & Products advanced earthing electrodes are built to last really long and protect your expensive equipment from dangerous fault currents. Think twice before you opt for conventional earthing techniques. After all your expensive equipments deserve nothing less than the best !!!

Features:

  • Primary Electrode made of Hot Dip Galvanized Iron Strip.
  • Secondary Electrode made of High Quality GI Pipe.
  • Pipe filled with Super Conductive Crystalline Compound (sccc).
  • Super Conductive Crystalline Compound protects the primary electrode from corrosion and also increases
    the surface area for enhanced conductivity.
  • Three level protection from corrosion:
    • Outer Pipe
    • Layer of super conductive crystalline compound
    • Primary Conductor (strip)

Directions of Use:

  • Drill or auger a hole in the ground
  • Place The Electrode In the center of the hole
  • Use R s Valve & Products ADVANCED EARTHING COMPOUND to backfill the area around the electrode.

Specifications:

MODEL NO DIAMETER LENGTH PRIMARY CONDUCTOR PRIMARY CONDUCTOR TYPE
RS-524 HDG 50 mm 2000 mm 40 x 6 mm HDGI
RS-534 HDG 50 mm 3000 mm 40 x 6 mm HDGI
RS-824 HDG 80 mm 2000 mm 40 x 6 mm HDGI
RS-834 HDG 80 mm 3000 mm 40 x 6 mm HDGI
RS-524 COP 50 mm 2000 mm 40 x 6 mm COPPER
RS-534 COP 50 mm 2000 mm 40 x 6 mm COPPER
RS-524 COP 80 mm 2000 mm 40 x 6 mm COPPER
RS-534 COP 80 mm 3000 mm 40 x 6 mm COPPER

Copper Bonded Rods

BMI Advanced Earthing Copper Bonded Rods Electrodes manufactured from 99.9 % pure electrolytic copper molecularly bonded onto a steel core in accordance with national and international standards. There is no metal interface, so dissimilar metal reaction cannot occur and the copper cannot beseparated from the steel. The core is of low carbon steel of grade 080A20 of BS 970 and has high tensile strength of 600 N/mm2

The copper covering is maintained at the root of the thread as, the threat are rolled onto the rod which ensures that an even copper covering is maintained.

Rolled threads also give strength greater than cut threads.

Features:

  • Electrode made of low carbon steel of grade 080A20 of BS 970 and has high tensile strength of 600 N/mm2.
  • Copper Used is of Electrolytic Grade of Purity 99.9%.
  • Copper Coating Thickness – 250 Mils or as per Customers requirement
  • Backfill Compound protects the electrode from corrosion and also increases the surface area for enhanced conductivity.
  • Three level protection from corrosion:
    • Electrolytic Copper Bonding Layer
    • Backfill Compound surrounding the Electrode

Specifications:

MODEL NO DIAMETER LENGTH CONDUCTOR Copper Bonding Thickness
RS-143 CBE 14.2 mm 3000 mm Mild Steel Rod 250 Mils
RS-143 CBE 14.2 mm 2000 mm Mild Steel Rod 250Mils
RS-173 CBE 17.2 mm 3000 mm Mild Steel Rod 250 Mils
RS-172 CBE 17.2 mm 2000 mm Mild Steel Rod 250 Mils
RS-163 CBE 16 mm 3000 mm Mild Steel Rod 250 Mils
RS-162 CBE 60 mm 2000 mm Mild Steel Rod 250 Mils
RS-123 CBE 12 mm 3000 mm Mild Steel Rod 250 Mils
RS-122 CBE 12 mm 2000 mm Mild Steel Rod 250 Mils

Directions of Use:

  • Drill or auger a hole in the ground
  • Place The Electrode In the center of the hole
  • Use BMI ADVANCED EARTHING COMPOUND to backfill the area around the electrode

Cast Iron Earting pipes

Based upon the extensive research work, carried out by our researchers, we have fabricated a wide range of Earthing Pipes that are widely used in power transmission applications. These pipes are manufactured as per the requirements of the clients within committed time frame. Our range of Earthing Pipes assures the clients of safe and higher earthing provision.

Features:

  • Robust construction .
  • Easy installation
  • Durable performance

Material Of Construction Cast Iron
Sizes Available 50mm to 250mm
Length and Thickness As per Boards Standard & any Custom Requirement
Type Flange Type, Clamp Type, Cone Type
Standard Followed IS 1536

GI Eartihing Pipes

Avail from us an assortment of GI pipe electrodes that are fabricated using premium quality raw material. Widely used in welding GI pipes, these electrodes are highly appreciated for their heavy duty feature, durability and performance. Further, our range is available in standard as well customized specifications to the clients.

Features:

  • Precise dimension .
  • High tensile strength
  • Corrosion resistant

Material Of Construction Galvanized Mild Steel
Sizes Available 20NB to 300NB
Length and Thickness As per Boards Standard and any Custom Requirement
Type Flange Type, Clamp Type, Plain and Drilled
Standard Followed I.S. : 1239/1990

Earthing Componds

An efficient backfill material should have high electrical conductivity, which should be constant and unaffected by changes in temperature and moisture. It should permanently remain embedded and should not dissolve in and swept away by water. It should have the ability to absorb large amount of water and retain the same over a long period of time. Finally, it should not cause or accelerate the corrosion of the earth electrode metal. Keeping in mind the above requirements, Balaji Metacast Industries has formulated BMI Advanced Earthing Compound. BMI advanced earthing compound is a result of extensive field studies and research by our engineers.

Features:

  • It is highly conductive earth-pit backfill. It therefore reduces number of parallel electrode required to be installed to achieve a low earth resistance value even in areas of very high soil resistivity.
  • It has the ability to hold moisture for very long periods. Hence it is maintenance free. Watering of the
    earth–pit is not required.
  • It does not corrode the electrode metal thereby increasing the life of the earth-pit.
  • Compatible with all types of earthing electrodes.

Copper Earth Electrode

Material Of Construction Copper
Sizes Available 25NB to 250NB
Length and Thickness As per Boards Standard and any Custom Requirement
Type Flange Type, Clamp Type,Plain and Drilled

Flats/Strips

We bring forth a range of earthing strips that find wide usage in various applications in automobile, engineering, electrical and other industries. Our range is widely demanded in the global market owing to their striking features such as electrical and thermal conductivity. Available in different sizes, these earthing strips are also supplied by us as per clients’ requirements and specifications.

Features:

  • Dimensionally accurate
  • Robust construction
  • Durable performance

Material Of Construction Mild Steel (Galvanized)
Sizes Available 25 x 3, 25 x 6, 50 x 3, 50 x 6, 50 x 8, 50 x 10, 75 x 10, 100 x 10, 100 x 16
Capacity 2000 Tones per Month

SIGN UP TO GET NEWSLETTERS